Inflow W125-Ducting Adaptor
| Enjoy controlled clean air ventilation An IQAir filter system combined with an InFlow W125 can be installed to draw outdoor air into an indoor environment. In this setup, an IQAir serves as a ventilation system, bringing in oxygen-rich outdoor air and a filtration system, which removes undesirable outdoor pollutants such as pollen, mould spores, dust and exhaust soot. As a result, fresh and filtered outside air is supplied to the room. Create clean positive pressure areas An IQAir filter system used in combination with the InFlow W125 will in most cases allow the creation of a positive pressure. This positive pressure helps to reduce contamination in the room by constantly flushing out air pollutants and by preventing outside pollutants from entering the room. |
| Application Examples
|
| Using an InFlow W125 with an IQAir system can improve indoor air quality by:
|
| The InFlow W125 kit can be easily added to any IQAir room air purifier in a matter of minutes. The only building modification required is a 125mm (5") hole in a window, wall or door which allows you to connect the InFlow W125 fabric duct and draw air into the room. The duct may be freely flexed to allow control over the desired vent location. It is expandable in length, from 250mm (10") in its original compressed state, to 1000mm (39") when fully extended. IQAir Compatibility |
Dental ProProfessional air cleaning for dental environments
...
|
Dental HgProfessional air cleaning for dental environments
...
|
OutFlow W125-Ducting AdaptorThe outflow w125 kit allows filtered air from any ...
|


















